Lonza PyroTec PRO Hardware User Manual page 57

The packaging consists of
A wooden pallet with specially shaped foam parts
•
• The cardboard box for accessories
A packaging strap, edge protection, buckle and brackets to fix the cardboard box to
•
the X-bay
• The outside wooden box with a lid, packaging straps
• Transport lock devices
Cardboard strips to block the axes
•
Cardboard strips to protect the worktable
•
• Foam blocks as shown in the figure:
A – Foam block for RoMa arm (example
shows block for RoMa long)
B – Foam block for LiHa arm
C – Foam block for PnP arm
D – Foam block for MCA
PyroTec™ PRO Hardw are User's Manual, V1.2
E – Foam block with adhesive tape to be
placed instead of arm
F – Diluter support block
G – Foam block for Front Loading Id
H – Support below Front Loading Id
I – Box corner protection
Return to TOC
57
RT-MN024-1.2 02/21