Safety Panels; Lower Diti Eject Option; Arm Guide - Lonza PyroTec PRO Hardware User Manual

Wipe the surface of the worktable with a suitable cleaning (e.g. alcohol, disinfectant)
•
to remove any spilled reagent.
• If necessary, clean with additional water.

9.3.5 Safety Panels

Cleaning the
Perform the following procedure to clean the safety panels.
Safety Panels
Wipe the inner and outer surface of the safety panels with a suitable cleaning agent,
•
e.g. water, alcohol, or disinfectant, to remove any spilled reagent or sample.
• If necessary, further clean the surface with water or alcohol.

9.3.6 Lower DiTi Eject Option

Cleaning the Perform the following procedure to clean the rocker of the lower DiTi eject option:
Rocker
• Wipe the surface of the rocker (A) with a suitable cleaning agent (e.g. alcohol, disin-
fectant)
• If necessary, further clean with water.

9.3.7 Arm Guide

The following description is applicable to:
• Liquid handling arm (LiHa)
• Robotic manipulator arm (RoMa standard and long)
Cleaning the In order to avoid uneven movements of the arm, use a cotton tab or a lint free tissue on a
Arm Guide screwdriver to clean the arm guide roller and a lint free tissue to clean the arm rails.
Note: Do not use alcohol or solvents to clean the arm guide. Do not use grease on the arm
rails.
PyroTec™ PRO Hardw are User's Manual, V1.2
Return to TOC
97
RT-MN024-1.2 02/21