Reporting; Transport - Lonza PyroTec PRO Hardware User Manual

• Unplug the power cord from the power supply at the rear of the instrument.
RS232 interface on Optib o PCB
A
• Disconnect the instrument from the PC.
If desired, unplug the interface cable from the USB port on the Te-CU board behind
•
the left access door.
Clean and, if necessary, decontaminate the entire instrument.
•

11.1.2 Reporting

Fill out a copy of the decontamination form and place it with the instrument.
•
Record the shut down in your "Maintenance and Service Logbook"
•

11.2 Transport

WARNING
Lifting or moving the instrument can cause serious injuries.
• Injuries to the back due to overload can occur
• Injuries can be caused due to a failing instrument
PyroTec™ PRO Hardw are User's Manual, V1.2
RS232 interface connector
Alternatively, Disconnect the RS-232 interface cable from the Te-CU board.
B
A
B USB connector
Return to TOC
108
RT-MN024-1.2 02/21