Safety Elements; Safety Panels; Door Locks; Modifications On The Safety Panels - Lonza PyroTec PRO Hardware User Manual

3.2 Safety Elements

3.2.1 Safety Panels

The space around the worktable is protected with safety panels. Whereas the front safety
panel can be opened, the other safety panels are permanently installed on the PyroTec™
PRO.
WARNING
Injuries caused by moving parts
A not completely opened front safety panel might close automatically. Open the front
safety panel completely (more than 180°).

3.2.2 Door Locks

During operation, the front safety panel is locked by means of two door locks.
The safety concept of the PyroTec™ PRO assumes that the front safety panel is always
closed when the instrument is running.

3.2.3 Modifications on the Safety Panels

Some options for the PyroTec™ PRO require modifications on the safety panels. These
modifications must be performed by a Lonza approved FAS (field application specialist)
when the option is installed.
WARNING If the options, which require modifications on the PyroTec™ PRO, are installed improperly,
the safety concept may be impaired.
Always make sure that the options are installed in compliance with the instructions given
by the manufacturer.
WARNING If any safety element fails to operate as expected, e.g. if the door locks fail to lock or open
at the expected time, immediately notify the Lonza field service engineer.

3.2.4 Which are Safety Elements?

The following figures show the elements of the PyroTec™ PRO, which have a protective
function or have in any other way to do with safety.
PyroTec™ PRO Hardw are User's Manual, V1.2
Return to TOC
18
RT-MN024-1.2 02/21