Shutdown, Transport And Storage; Shutdown; Instrument - Lonza PyroTec PRO Hardware User Manual

11 Shutdown, Transport and Storage

Purpose of
This chapter instructs how to shut down the PyroTec™ PRO, how to pack it for storage or
This Chapter transport, and specifies the storage and shipping conditions.

11.1 Shutdown

11.1.1 Instrument

Since the material processed by the PyroTec™ PRO is unknown to Lonza, detailed infor-
mation on how to dispose of it cannot be given here.
WARNING
Chemical, biological, and radioactive hazards can be associated with the waste material
from the process run on the PyroTec™ PRO.
Treat these substances and disposables, such as DiTis, etc. in accordance with good labora-
tory practice guidelines.
Inquire about appropriate collecting points and approved methods of disposal in your
country, state, or region.
When disposing of operating material of the PyroTec™ PRO the relevant national and re-
gional laws, directives and recommendations must be followed.
• To shut down the instrument for a long period:
Save data and exit application software and instrument software.
•
• Press the power ON/OFF switch for 2 seconds to switch the instrument off.
The status lamp turns off.
A
Note: Wait until the status lamp is off before switching the instrument on again.
PyroTec™ PRO Hardw are User's Manual, V1.2
Pause button B Power ON/OFF switch
Return to TOC
107
RT-MN024-1.2 02/21