Lcd Adjustment Settings - ATEN CL1016M User Manual

CL1008 / CL1016 User Manual

LCD Adjustment Settings

An explanation of the LCD OSD adjustment settings is given in the table
below:
Setting
Brightness
Contrast
Phase
Clock
H-Position
V-Position
Color Temperature
Language
OSD Duration
Reset
20
Adjusts the background black level of the screen image.
Adjusts the foreground white level of the screen image.
If pixel jitter or horizontal line noise is visible on the display,
your LCD may have the wrong phase setting. Adjust the
phase setting to eliminate these problems.
If vertical banding is visible on the display, your LCD may
have the wrong clock setting. Adjust the clock setting to
eliminate vertical banding.
Positions the display area on the LCD panel horizontally
(moves the display area left or right).
Positions the display area on the LCD panel vertically
(moves the display area up or down).
Adjusts the color quality of the display. You can adjust the
warmth value, color balance, etc. The Adjust Color
selection has a further submenu that lets you fine tune the
RGB values.
Selects the language that the OSD displays its menus in.
Lets you set the amount of time the OSD displays on the
screen. If there is no input for the amount of time you
choose, the OSD display turns off.
Resets the adjustments on all menus and submenus to
their factory default settings.
Note: The Language setting does not return to the factory
default, but remains at the one that you have set it to.
Explanation