Copying Printer Settings To Other Printers; Restoring Factory Default Settings - Lexmark CX517 User Manual

Managing the printer
Notification
Non Continuable Stop
1
The printer generates an e-mail about the status of the supply when supply notification is enabled.
2
The printer stops when some supplies become empty to prevent damage.
4
Click Submit.

Copying printer settings to other printers

Note: This feature is available only in network printers.
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears
as four sets of numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click the Copy Printer Settings.
3
To change the language, select a language from the drop-down menu, and then click Click here to submit
language.
4
Click Printer Settings.
5
Type the IP addresses of the source and target printers in their appropriate fields.
Note: If you want to add or remove a target printer, then click Add Target IP or Remove Target IP.
6
Click Copy Printer Settings.

Restoring factory default settings

If you want to keep a list of the current menu settings for reference, then print a menu settings page before
restoring the factory default settings. For more information, see
If you want a more comprehensive method of restoring the printer factory default settings, then perform the
Wipe All Settings option. For more information, see
Warning—Potential Damage: Restoring factory defaults returns most printer settings to the original factory
default settings. Exceptions include the display language, custom sizes and messages, and network/port
menu settings. All downloads stored in the RAM are deleted. Downloads stored in the flash memory or in a
printer hard disk are not affected.
From the home screen, navigate to:
> Settings > General Settings > Factory Defaults > Restore Now > Submit
Description
1,2
The printer stops when the supply condition is reached. The supply must be replaced
to continue printing.
"Printing a menu settings page" on page
"Erasing non‑volatile memory" on page
238
42.
205.