Lexmark CX517 User Manual page 164

Understanding the printer menus
Use
Darkness
1–9
Dial Prefix
Dialing Prefix Rules
Prefix Rule [x]
Automatic Redial
0–9
Redial frequency
1–200
Behind a PABX
Yes
No
Enable ECM
Yes
No
Enable Fax Scans
On
Off
Driver to fax
Yes
No
Allow Save as Shortcut
On
Off
Dial Mode
Tone
Pulse
Max Speed
2400
4800
9600
14400
33600
Custom Job scanning
On
Off
To
Lighten or darken the output.
Note: 5 is the factory default setting.
Enter a dialing prefix, such as 99. A numeric entry field is provided.
Establish a dialing prefix rule.
Specify the number of times the printer tries to send the fax to a specified
number.
Note: 5 is the factory default setting.
Specify the number of minutes between redials.
Note: 3 is the factory default setting.
Enable or disable switchboard blind dialing without a dial tone.
Note: No is the factory default setting.
Enable or disable Error Correction Mode for fax jobs.
Note: Yes is the factory default setting.
Fax files that are scanned at the printer.
Note: On is the factory default setting.
Allow the print driver to send fax jobs.
Note: Yes is the factory default setting.
Save fax numbers as shortcuts in the printer.
Note: On is the factory default setting.
Specify the dialing sound.
Note: Tone is the factory default setting.
Specify the maximum speed in baud at which faxes are sent.
Note: 33600 is the factory default setting.
Scan a document that contains mixed paper sizes into a single file.
Notes:
•
Off is the factory default setting.
•
This menu item appears only when a formatted, working printer hard disk
is installed.
164