Lexmark CX517 User Manual page 161

Understanding the printer menus
Use
Sharpness
1–5
Temperature
‑4 to 4
Sample Copy
Off
On
Fax Settings menu
Fax Mode (Analog Fax Setup) menu
Analog Fax Setup mode sends the fax job through a telephone line.
General Fax Settings
Use
Restore Factory Defaults
Optimize Fax Compatibility
Fax Name
Fax Number
Fax ID
Fax Name
Fax Number
Enable Manual Fax
On
Off
Memory Use
All receive
Mostly receive
Equal
Mostly send
All send
Cancel Faxes
Allow
Don't Allow
To
Adjust the amount of sharpness of a copy.
Note: 3 is the factory default setting.
Specify warm or cool outputs. Cool values generate a bluer output than the
default while warm values generate a redder output than the default.
Note: 0 is the factory default setting.
Create a sample copy of the original document.
Note: Off is the factory default setting.
To
Restore the factory defaults of all fax settings.
Optimize fax compatibility with other fax machines.
Specify the name of the fax in the printer.
Specify the telephone number assigned to the fax.
Specify how the fax is identified.
Note: Fax Number is the factory default setting.
Set the printer to fax manually, which requires a line splitter and a telephone
handset.
Notes:
•
Off is the factory default setting.
•
Use a regular telephone to answer an incoming fax job and to dial a fax
number.
•
Press # 0 on the numeric keypad to go directly to the Manual Fax
function.
Define the allocation of non-volatile memory between sending and receiving fax
jobs.
Note: Equal is the factory default setting.
Specify whether canceling of fax jobs is allowed.
Note: Allow is the factory default setting.
161