Lexmark CX517 User Manual page 157

Understanding the printer menus
Use
Export Configuration File
Export
Export Compressed Logs File
Export
Copy Settings menu
Use
Content Type
Text
Graphics
Text/Photo
Photo
Content Source
Black/White Laser
Color Laser
Inkjet
Photo/Film
Magazine
Newspaper
Press
Other
Color
Auto
On
Off
Auto Color Detect
Color Sensitivity
1–9
Area Sensitivity
1–9
Allow color copies
On
Off
Sides (Duplex)
1 sided to 1 sided
1 sided to 2 sided
2 sided to 1 sided
2 sided to 2 sided
To
Export configuration files to a flash drive.
Export the printer compressed logs file to a flash drive.
To
Specify the content of the original document.
Note: Text/Photo is the factory default setting.
Specify how the original document was produced.
Note: Color Laser is the factory default setting.
Specify whether copies are printed in color.
Note: On is the factory default setting.
Set the amount of color the printer can detect from the original document.
Note: This menu item is applicable only when Color is set to Auto.
Enable color in copies.
Notes:
•
On is the factory default setting.
•
Setting this to Off hides all color‑specific menus.
•
This setting overrides the Color setting.
Specify whether an original document is two‑sided or one‑sided, and then
specify whether the copy should be two‑sided or one‑sided.
Note: 1 sided to 1 sided is the factory default setting. This setting is selected
when using a one-sided original document for a one-sided copy job.
157