Lexmark CX517 User Manual page 179

Understanding the printer menus
Use
Scan Preview
On
Off
Allow Save as Shortcut
On
Off
Background Removal
‑4 to 4
Color Balance
Cyan‑Red
Magenta‑Green
Yellow‑Blue
Color Dropout
Color Dropout
None
Red
Green
Blue
Default Red Threshold
0–255
Default Green Threshold
0–255
Default Blue Threshold
0–255
Contrast
0–5
Best for content
Mirror Image
Off
On
Negative Image
Off
On
Shadow Detail
‑4 to 4
Adjust ADF Skew
Auto
Off
On
To
Specify whether a preview appears on the display for scan jobs.
Notes:
•
Off is the factory default setting.
•
This menu item appears only when a formatted, working printer hard disk
is installed.
Enable shortcut creation for FTP addresses.
Note: On is the factory default setting.
Adjust the amount of background visible on a copy.
Note: 0 is the factory default setting.
Enable an equal balance of colors in the output.
Specify which color to drop and to adjust the dropout setting for each color
threshold.
Notes:
•
None is the factory default setting for Color Dropout.
•
128 is the factory default setting for each color threshold.
Specify the contrast of the output.
Note: Best for content is the factory default setting.
Create a mirror image of the original document.
Note: Off is the factory default setting.
Create a negative image of the original document.
Note: Off is the factory default setting.
Adjust the amount of shadow detail visible on a scanned image.
Note: 0 is the factory default setting.
Correct slight skew in the scanned image.
Notes:
•
Auto is the factory default setting.
•
This menu item is supported only in some printer models.
179