Copying Printer Settings To Other Printers - Lexmark MS410 series User Manual

Managing the printer
Notes:
•
Selectable alerts can be set on the toner cartridge and imaging unit.
•
All selectable alerts can be set for nearly low, low, and very low supply conditions. Not all selectable alerts can
be set for the end‑of‑life supply condition. E‑mail selectable alert is available for all supply conditions.
•
The percentage of estimated remaining supply that prompts the alert can be set on some supplies for some
supply conditions.
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four
sets of numbers separated by periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > Print Settings > Supply Notifications.
3
From the drop‑down menu for each supply, select one of the following notification options:
Notification
Off
SNMP Only
E‑mail Only
Warning
1
Continuable Stop
Non Continuable Stop
1
The printer generates an e-mail about the status of the supply when supply notification is enabled.
2
The printer stops when some supplies become empty to prevent damage.
4
Click Submit.

Copying printer settings to other printers

Note: This feature is available only in network printers.
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four
sets of numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click the Copy Printer Settings.
Description
The normal printer behavior for all supplies occurs.
The printer generates a simple network management protocol (SNMP) alert when the supply
condition is reached. The status of the supply will appear on the menus page and status
page.
The printer generates an e-mail when the supply condition is reached. The status of the
supply will appear on the menus page and status page.
The printer displays the warning message and generates an e‑mail about the status of the
supply. The printer does not stop when the supply condition is reached.
The printer stops processing jobs when the supply condition is reached, and the user needs
to press a button to continue printing.
1,2 The printer stops when the supply condition is reached. The supply must be replaced to
continue printing.
98