Lexmark CX517 User Manual page 189

Understanding the printer menus
Use
Paper Saver Ordering
Horizontal
Reverse Horizontal
Reverse Vertical
Vertical
Paper Saver Orientation
Auto
Landscape
Portrait
Paper Saver Border
None
Solid
Quality menu
Use
Print Mode
Color
Black Only
Color Correction
Auto
Off
Manual
Print Resolution
1200 dpi
4800 CQ
Toner Darkness
1–5
Enhance Fine Lines
On
Off
Color Saver
On
Off
RGB Brightness
‑6 to 6
RGB Contrast
0–5
To
Specify the order in which pages are printed on a single sheet when using Paper
Saver.
Notes:
•
Horizontal is the factory default setting.
•
Positioning depends on the number of page images and whether they
are in portrait or in landscape orientation.
Specify the orientation in which pages are printed on a single sheet.
Note: Auto is the factory default setting. The printer chooses between
portrait and landscape.
Print a border when using Paper Saver.
Note: None is the factory default setting.
To
Specify whether to print images in color.
Note: Color is the factory default setting.
Adjust the color output on the printed page.
Note: Auto is the factory default setting.
Specify the output resolution in dots per inch (dpi) or in color quality (CQ).
Note: 4800 CQ is the factory default setting.
Lighten or darken the output.
Note: 4 is the factory default setting.
Enable a print mode preferable for files such as architectural drawings, maps,
electrical circuit diagrams, and flow charts.
Note: Off is the factory default setting.
Reduce the amount of toner used for graphics and images.
Notes:
•
Off is the factory default setting.
•
On overrides the Toner Darkness setting.
Adjust the brightness of the output.
Note: 0 is the factory default setting.
Adjust the contrast of the output.
Note: 0 is the factory default setting.
189