Lexmark CX517 User Manual page 287

Troubleshooting
Action
Step 1
Check if the paper loaded in the tray has the correct paper type
and weight.
Is paper with the correct paper type and weight loaded in the tray?
Step 2
From the printer control panel, set the paper type and weight in
the Paper menu to match the paper loaded in the tray.
Do the printer settings match the type and weight of the paper
loaded?
Step 3
a
Depending on your operating system, specify the paper type
and weight from Printing Preferences or from the Print dialog.
b
Resend the print job.
Do shadow images still appear on prints?
Step 4
Replace the imaging kit, and then resend the print job.
Do shadow images still appear on prints?
Skewed print
Action
Step 1
a
Move the width and length guides in the tray to the correct
positions for the size of the paper loaded.
b
Resend the print job.
Is the print still skewed?
Yes No
Go to step 2. Load paper with the
correct paper type
and weight in the
tray.
Go to step 3. Change the paper
type and weight to
match the paper
loaded in the tray.
Go to step 4. The problem is
solved.
Contact customer The problem is
support. solved.
Yes No
Go to step 2. The problem is
solved.
287