Lexmark CX517 User Manual page 155

Understanding the printer menus
Use
Timeouts
Screen Timeout
15–300
Timeouts
Print Timeout
Disabled
1–255
Timeouts
Wait Timeout
Disabled
15–65535
Timeouts
Job Hold Timeout
5–255
Error Recovery
Auto Reboot
Reboot when idle
Reboot always
Reboot never
Error Recovery
Max Auto Reboots
1–20
Print Recovery
Auto Continue
Disabled
5–255
Print Recovery
Jam Recovery
On
Off
Auto
To
Set the idle time before the display automatically returns to
Ready state.
Note: 30 seconds is the factory default setting.
Set the printer to end a print job after it has been idle for the
specified amount of time.
Notes:
•
90 seconds is the factory default setting.
•
When the timer expires, any partially printed page still in
the printer is printed.
•
Print Timeout is available only when using PCL
emulation.
Set the time the printer waits to receive more data from the
host.
Notes:
•
40 seconds is the factory default setting.
•
Wait Timeout is available only when the printer is using
PostScript emulation.
Set the time the printer waits for user intervention before it
holds jobs that require unavailable resources.
Notes:
•
30 seconds is the factory default setting.
•
This menu item appears only when a hard disk is
installed.
Set the printer to restart when an error occurs.
Note: Reboot always is the factory default setting.
Determine the number of automatic reboots that the printer
can perform.
Note: 2 is the factory default setting.
Let the printer automatically continue printing from certain
offline situations when these are not resolved within the
specified time period.
Note: Disabled is the factory default setting.
Specify whether the printer reprints jammed pages.
Note: Auto is the factory default setting. The printer reprints
jammed pages unless other printer tasks need the memory
required to hold the pages.
155