Lexmark CX517 User Manual page 186

Understanding the printer menus
Use
Recognized Languages
English
French
German
Spanish
Italian
Portugues
Danish
Dutch
Norwegian
Swedish
Finnish
Hungarian
Polish
Print Settings
Setup menu
Use
Printer Language
PCL Emulation
PS Emulation
Job Waiting
On
Off
Print Area
Normal
Fit to Page
Whole Page
To
Set the language or languages that the OCR can recognize.
For each language, select from the following options:
Off
On
Note: The language is enabled by default. If it is set to a value that is not in
the list of recognized languages, English is enabled by default.
To
Set the default printer language.
Notes:
•
PS Emulation is the factory default printer language.
•
Setting a printer language as the default does not prevent a software
program from sending print jobs that use another printer language.
Specify that print jobs be removed from the print queue if they require
unavailable printer options or custom settings. They are stored in a separate
print queue, so other jobs print normally. When the missing information or
options are obtained, the stored jobs print.
Notes:
•
Off is the factory default setting.
•
This menu item appears only when a formatted, working printer hard
disk is installed. This requirement ensures that stored jobs are not
deleted if the printer loses power.
Set the logical and physical printable area.
Notes:
•
Normal is the factory default setting. When attempting to print data in
the non‑printable area defined by the Normal setting, the printer clips
the image at the boundary.
•
Whole Page allows the image to be moved into the non‑printable area
defined by the Normal setting. Whole Page only affects pages printed
using a PCL 5e interpreter. This setting has no effect on pages printed
using the PCL XL or PostScript interpreter.
186