Lexmark CX517 User Manual page 260

Troubleshooting
Scanner jam, remove jammed originals from the scanner [2yy.xx]
Remove the jammed paper from the scanner.
SMTP server not set up. Contact system administrator.
From the printer control panel, touch Continue to clear the message.
Note: If the message appears again, then contact your system support person.
Some held jobs were not restored
From the printer control panel, touch Continue to delete the indicated job.
Note: Held jobs that are not restored remain in the printer hard disk and are inaccessible.
Standard network software error [54]
Try one or more of the following:
•
From the printer control panel, touch Continue to continue printing.
•
Turn off the printer, and then turn it back on.
•
Update the network firmware in the printer or print server. For more information, visit the Lexmark
support Web site at
message.
Standard USB port disabled [56]
Try one or more of the following:
•
From the printer control panel, touch Continue to clear the message.
•
Enable the USB port. From the printer control panel, navigate to:
Network/Ports > USB Buffer > Auto
Note: The printer discards any data received through the USB port.
Supply needed to complete job
Try one or more of the following:
•
From the printer control panel, touch Prompt for supplies to view all error messages that indicate what
supplies are needed to continue processing the current job.
1
Order the missing supply immediately.
2
Install the supply. For more information, see the instruction sheet that came with the supply.
•
Cancel the print job, then install the missing supply, and then resend the print job.
http://support.lexmark.com or contact customer support, and then report the
260