Solving Printer Problems - Lexmark CX517 User Manual

Troubleshooting
Waste toner bottle nearly full [82.xy]
You may need to order a waste toner bottle. If necessary, touch Continue on the printer control panel to
clear the message and continue printing.
Weblink server not set up. Contact system administrator.
An error occurred on the Weblink server, or the server is not configured properly. Touch Continue to clear
the message. If the message appears again, contact your system support person.

Solving printer problems

Basic printer problems
Printer display is blank
Action
Step 1
Press the Sleep button on the printer control panel.
Does Ready appear on the printer display?
Step 2
Turn off the printer, then wait for about 10 seconds, and then turn
the printer back on.
Do Please wait and Ready appear on the printer display?
The printer is not responding
Action
Step 1
Make sure the printer is turned on.
Is the printer turned on?
Step 2
Check if the printer is in Sleep mode or Hibernate mode.
Is the printer in Sleep mode or Hibernate mode?
Step 3
Check if one end of the power cord is plugged into the printer and
the other to a properly grounded electrical outlet.
Is the power cord plugged into the printer and a properly grounded
electrical outlet?
Yes No
The problem is Go to step 2.
solved.
The problem is Turn off the printer,
solved. and then contact
customer
Yes No
Go to step 2. Turn on the printer.
Press the Sleep Go to step 3.
button to wake the
printer from Sleep
mode or Hibernate
mode.
Go to step 4. Plug one end of the
power cord into the
printer and the other
to a properly
grounded electrical
outlet.
262
support.