Lexmark CX517 User Manual page 139

Understanding the printer menus
Use
Choose Network
View Signal Quality
View Security Mode
AppleTalk menu
To access the menu, navigate to either of the following:
•
Network/Ports > Standard Network > Standard Network Setup > AppleTalk
•
Network/Ports > Network [x] > Network [x] Setup > AppleTalk
Use
Activate
Yes
No
View Name
View Address
Set Zone
[list of zones available on the
network]
Standard USB menu
Use
PCL SmartSwitch
On
Off
To
Select an available network for the printer to use.
View the quality of the wireless connection.
View the encryption method for the wireless network.
To
Enable or disable AppleTalk support.
Note: No is the factory default setting.
Show the assigned AppleTalk name.
Note: The AppleTalk name can be changed only from the Embedded
Web Server.
Show the assigned AppleTalk address.
Note: The AppleTalk address can be changed only from the Embedded
Web Server.
Provide a list of AppleTalk zones available on the network.
Note: The default zone for the network is the factory default setting.
To
Set the printer to automatically switch to PCL emulation when a print job
received through a USB port requires it, regardless of the default printer
language.
Notes:
•
On is the factory default setting.
•
When set to Off, the printer does not examine incoming data. The printer
uses PostScript emulation if the PS SmartSwitch is set to On. It uses the
default printer language specified in the Setup menu if the PS
SmartSwitch is set to Off.
139