Lexmark CX517 User Manual page 192

Understanding the printer menus
Use
Log Action at Full
None
E‑mail & Delete Current Log
E‑mail & Delete Oldest Log
Post & Delete Current Log
Post & Delete Oldest Log
Delete Current Log
Delete Oldest Log
Delete All Logs
Delete All But Current
URL to Post Logs
E‑mail Address to Send Logs
Log File Prefix
Utilities menu
Use
Remove Held Jobs
Confidential
Held
Not Restored
All
Format Flash
Yes
No
To
Determine and set how the printer responds when disk usage reaches the
maximum limit (100MB).
Note: None is the factory default setting.
Determine and set where the printer posts job accounting logs.
Specify the e‑mail address to which the printer sends job accounting logs.
Specify the prefix you want for the log file name.
Note: The current host name defined in the TCP/IP menu is used as the
default log file prefix.
To
Delete confidential and held jobs from the printer hard disk.
Notes:
•
Selecting a setting affects only print jobs that are resident in the printer.
Bookmarks, print jobs on flash drives, and other types of held jobs are
not affected.
•
Not Restored removes all Print and Hold jobs that are not restored from
the printer hard disk or memory.
Format the flash memory.
Warning—Potential Damage: Do not turn off the printer while the flash
memory is being formatted.
Notes:
•
Yes deletes all data stored in flash memory.
•
No cancels the format request.
•
Flash memory refers to the memory added by installing a flash memory
card in the printer.
•
The flash memory option card must not be read/write‑ or write‑protected.
•
This menu item appears only when a non‑defective flash memory card is
installed.
192