Understanding the printer menus
Use
Sides (Duplex)
Off
Long edge
Short edge
JPEG Quality
Best for content
5–90
Text Default
5–90
Text/Photo Default
5–90
Photo Default
5–90
Use Multi‑Page TIFF
On
Off
Scan Bit Depth
1 bit
8 bit
File Name
Custom Job Scanning
On
Off
Scan Preview
On
Off
Background Removal
‑4 to 4
Color Balance
Cyan - Red
Magenta - Green
Yellow - Blue
To
Specify the orientation of the original documents loaded in the ADF for
two‑sided scanning.
Note: Off is the factory default setting.
Set the quality of a JPEG photo image in relation to file size and quality.
Notes:
•
Best for content is the factory default setting.
•
5 reduces the file size, but the quality of the image is lessened.
•
90 provides the best image quality, but the file size is very large.
Set the quality of the text in relation to file size and the quality of the image.
Note: 75 is the factory default setting.
Set the quality of a text/photo image in relation to file size and quality.
Note: 75 is the factory default setting.
Set the quality of a photo image in relation to file size and quality.
Note: 50 is the factory default setting.
Provide a choice between single-page TIFF files and multiple‑page TIFF files.
For a multiple-page scan‑to‑FTP job, either one TIFF file is created containing
all the pages, or multiple TIFF files are created with one file for each page.
Note: On is the factory default setting.
Enable the Text/Photo mode to produce smaller file sizes by using 1‑bit images.
Note: 8 bit is the factory default setting.
Type a base file name.
Copy a document that contains mixed paper sizes.
Note: Off is the factory default setting.
Specify whether a preview appears on the display for scan jobs.
Notes:
•
Off is the factory default setting.
•
This menu item appears only when a formatted, working printer hard disk
is installed.
Adjust the amount of background visible on a copy.
Note: 0 is the factory default setting.
Enable an equal balance of colors in the output.
182