Understanding the printer menus
Print Settings
Copies
1–999
Paper Source
Tray [x]
Multipurpose Feeder
Manual Paper
Manual Envelope
Color
Color
Black only
Collate
(1,1,1) (2,2,2)
(1,2,3) (1,2,3)
Sides (Duplex)
1 sided
2 sided
Duplex Binding
Long Edge
Short Edge
Paper Saver Orientation
Auto
Landscape
Portrait
Paper Saver
Off
2‑Up
3‑Up
4‑Up
6‑Up
9‑Up
12‑Up
16‑Up
Paper Saver Border
None
Solid
Specify a default number of copies for each print job.
Note: 1 is the factory default setting.
Set a default paper source for all print jobs.
Note: Tray 1 is the factory default setting.
Specify whether to print the document in color.
Note: Color is the factory default setting.
Stack the pages of a print job in sequence when printing multiple copies.
Note: (1,2,3) (1,2,3) is the factory default setting.
Enable two‑sided printing for incoming print jobs.
Note: 1 sided is the factory default setting.
Define binding for two-sided pages in relation to page orientation.
Notes:
•
Long Edge is the factory default setting. This assumes binding along the long
edge of the page (left edge for portrait and top edge for landscape).
•
Short Edge assumes binding along the short edge of the page (top edge for
portrait and left edge for landscape).
Specify the orientation of a multiple‑page document.
Note: Auto is the factory default setting.
Print multiple-page images on one side of the paper.
Note: Off is the factory default setting.
Print a border on each page image.
Note: None is the factory default setting.
184