Micromeritics ACCUPYC II 1345 Operator's Manual page 124

8 Selected Reports
Density Volume vs Cycle Number Trend Plot (continued)
Field or Button
Show +/-
[check box]
Show Average
[check box]
Show Min
Show Max
[check box]
Show Reference
[check box]
X-Axis [check box]
Y-Axis [check box]
For fields and buttons not listed in this table, see
tons on page 3 -
8 - 4
Description
Select to place two horizontal lines on the graph. The top line will be
placed at a point relative to the average and standard deviation of the
data. The bottom line will be placed at the point entered in the adjacent
field.
Select to show the average of all cycles. A horizontal line is placed at
the average point for the cycles.
Horizontal lines are placed at the entered limits.
Select to show a horizontal line placed at a reference point specified in
the adjacent field.
Variables available for the x-axis.
Variables available for the y-axis.
2.
Common Fields and But-
AccuPyc II 1345 Operator Manual
134-42851-01 (Rev A) — Jan 2021