Calibration Data - Micromeritics ACCUPYC II 1345 Operator's Manual

C D
ALIBRATION ATA
Display Text
Setup Type?

Calibration Data

Calibration Data
Chamber Insert?
Calibration Data
Cell Volume:
Calibration Data
Expansion Volume:
AccuPyc II 1345 Operator Manual
134-42851-01 (Rev A) — Jan 2021
Description
Press CHOICE until Calibration Data is displayed, then press ENTER.
Select Yes at the Request insert prompt in Report Options. Press
CHOICE until the appropriate insert is displayed, then press ENTER.
3
None, 0.1 cm (for 1 cm
n
3
None, 3.5 cm , 1.0 cm
n
3
None, 35 cm , 10.0 cm
n
3
None, 650 cm , 1300 cm
n
Displays the cell volume determined during calibration. Cell volumes
can also be entered at this prompt. Press ENTER.
The range is 0.01 to 999.0000 cm
Displays the expansion volume determined during calibration. Press
ENTER.
The range is 0.5 to 999.0000 cm
3
unit)
3 3
(for 10 cm unit)
3 3
(for 100 cm unit)
3 3
(for 2000 cm pycnometer)
3
.
3
.
Calibration Data
10 - 15