Micromeritics ACCUPYC II 1345 Operator's Manual page 90

6 Perform an Analysis
Display Text
Analyze Sample Mass:
Analyze Chamber
insert?
Analyze Cup Mass?
Analyze
[ENTER] to start
[ESCAPE] to cancel
For keypad and/or keyboard functions or commands not listed in this table,
see About the Keypad on page 2 -
6 - 6
Description
Enter a value for the sample mass. Displays only when Density is
selected for Analysis display mode. It does not display if Volume is
selected.
The range is 000.0000 to 10000.0000 g.
The range for the 2000 cm
This field will also accept input from a connected analytical balance.
While this prompt is displayed, press the appropriate button on the
analytical balance to transfer the mass (refer to the manufacturer's
manual for the appropriate command).
Select the insert to be used.
3
None, 0.1 cm (for 1 cm
n
3
None, 3.5 cm , 1.0 cm
n
3
None, 35 cm , 10.0 cm
n
3
None, 650 cm , 1300 cm
n
Press CHOICE until the appropriate insert is displayed or None if an
insert is not being used.
Enter the mass of the sample cup.
ENTER. Starts the analysis. The analysis begins and operational
status messages are continually displayed during analysis
ESCAPE. Cancels the analysis.
3.
3
AccuPyc is 000.0000 to 25000.0000 g.
3
unit)
3 3
(for 10 cm unit)
3 3
(for 100 cm unit)
3 3
(for 2000 cm pycnometer)
AccuPyc II 1345 Operator Manual
134-42851-01 (Rev A) — Jan 2021