Adjusting The Suntour Compression Adjuster - Shimano EDISON COMP I-12 Original Operating Instructions

6.5.15.1 Adjusting the Suntour compression adjuster

Only applies to pedelecs with this equipment
Figure 118: Suntour compression adjuster (1) on the rear
frame damper
1 Set the compression adjuster to the middle
position.
2 Ride the pedelec over a small obstacle.
 Turn compression adjuster anti-clockwise.
 The damping and compression hardness is
reduced. The deflection stroke speed is
increased.
 Turn compression adjuster clockwise.
 The damping and compression hardness is
increased. The deflection stroke speed is
reduced.
3 The ideal setting for the rebound damper has
been achieved when the rebound movement of
the rear wheel feels comparable to that of the
front wheel.
MY22H03 - 22_1.0_01.10.2021
1
Operation
112