Shimano EDISON COMP I-12 Original Operating Instructions page 57

eightpins H01
Seat post axle
Slipper clutch
Valve cap
Postpin axle
Rear clamping screw (saddle)
M5 attachment screw for outer sleeve
LIMOTEC LimoDP
Seat post clamping screw
Saddle clamping screw
SUNTOUR suspension seat post
Seat clamping screw
M5 fixing grub screws
Pedals
Pedal, conventional
Table 27: Tightening torques and bits
*if there is no other data on the component
MY22H03 - 22_1.0_01.10.2021
8 Nm
18 Nm
0.5 Nm
8 Nm
8 Nm
0.5 Nm
6...7 Nm
7...9 Nm
15...18 Nm
3 Nm
33...35 Nm
Description
6 mm hex bit
3 mm hex bit
5 mm hex bit
5 mm hex bit
3 mm hex bit
3 mm hex bit
2.5 mm hex bit
15 mm spanner
56