Using Pedelec With The Electric Drive System; Switching On The Electric Drive System; Switching Off The Electric Drive System - Shimano EDISON COMP I-12 Original Operating Instructions

6.20

Using pedelec with the electric drive system

6.20.1 Switching on the electric drive
system
CAUTION
!
Crash caused by lack of readiness for braking
When it is switched on, the drive system can be
activated by applying force to the pedals. There is
a risk of a crash if the drive is activated uninten-
tionally and the brake is not reached.
 Never start the electric drive system, or switch
it off immediately, if the brake cannot be
reached safely and reliably.

A sufficiently charged battery has been inserted
into the pedelec.

Never place your feet on the pedals when
switching on. If the pedals are moved when
switching on, a system error is caused.

The battery is firmly in place. The key has been
removed.

The system cannot be switched on while
charging.
Figure 142: On-off button (1) with LED (2)
 Press On-Off button.
 The LED light will light up and indicate the
remaining battery capacity.
 If the drive system is switched on, the drive is
activated as soon as the pedals are moved with
sufficient force.
MY22H03 - 22_1.0_01.10.2021
6.20.2 Switching off the electric drive
The system switches off automatically ten minutes
after the last command.
The drive system can also be switched off on the
battery.
 Press On-Off button for 6 seconds.
1
1
2
system
Operation
130