Adjusting The Suntour Fork Steel Suspension - Shimano EDISON COMP I-12 Original Operating Instructions

6.5.12.1 Adjusting the Suntour fork steel suspension

Only applies to pedelecs with this equipment
1 You will find the sag setting wheel (1) beneath
the plastic cover on the crown. Remove the
plastic cover.
Figure 108: Sag setting wheel (1) on the suspension fork crown
 Turn the sag setting wheel clockwise to
increase the spring pre-tensioning.
 Turn the sag setting wheel anti-clockwise to
decrease the spring pre-tensioning.
 You will have made the ideal setting when the
shock absorber deflects 3 mm when subject to
body weight.
3 Replace the plastic cover on the crown after
making the setting.
MY22H03 - 22_1.0_01.10.2021
Operation
1
101