Rebounding Too Slowly - Shimano EDISON COMP I-12 Original Operating Instructions

9.5.2.2 Rebounding too slowly

The fork does not rebound quickly enough after
absorbing a bump. The fork also remains
deflected over subsequent bumps, which reduces
deflection and increases the hardness of impacts.
Available deflection, traction and control decrease
(blue line).
Figure 241: Suspension fork rebounding too slowly
Solution
Figure 242: Suntour rebound screw (1)
 Turn rebound screw in an anti-clockwise
direction.
 The rebound speed is increased (faster
return).
MY22H03 - 22_1.0_01.10.2021
Troubleshooting, fault clearance and repair
The fork remains in a deflected state, causing the
headset and handlebars to move to a lower
position. Body weight is shifted forward after the
impact (green line).
1
209