Checking The Back-Pedal Brake - Shimano EDISON COMP I-12 Original Operating Instructions

7.5.2.5 Checking the back-pedal brake

Only applies to pedelecs with this equipment

There are sharp corners and edges on the back-
pedal brake. Wear gloves.
1 Hold and check counter support to ensure it is
firmly attached to rear frame down tube.
 Tighten screw into the counter support if it is
loose.
2 Carry out brake test. Listen for noises while
doing so.
 If braking with the backpedal makes noises,
contact specialist dealer.
MY22H03 - 22_1.0_01.10.2021
Cleaning and servicing
166