Gear Shift; Using The Belt Gear Shift - Shimano EDISON COMP I-12 Original Operating Instructions

6.25

Gear shift

The selection of the appropriate gear is a
prerequisite for a physically comfortable ride and
making sure that the electric drive system
functions properly. The ideal pedalling frequency
is between 70 and 80 revolutions per minute.
 Stop pedalling briefly when changing gears.
This makes it easier to switch gears and
reduces wear on the drivetrain.

6.25.1 Using the belt gear shift

Gears can be shifted manually in addition to
automatically.
The speed and range can be increased while
applying the same force if you select the right
gear. Use the belt gear shift.
The right-hand control panel on the
handlebars (III) switches the gears.
I
Figure 153: Overview of control panel position
There can be three different control panels:
• 3-switch control panel
• 2-switch control panel
• MTB control panel.
MY22H03 - 22_1.0_01.10.2021
II III
3-switch control panel
1
2
3
Figure 154: 3-switch control panel
Switch X
1
2 Switch A
3 Switch Y
2-switch control panel
1
2
Figure 155: 2-switch control panel
Switch X
1
2 Switch Y
Operation
140