Excessively Hard Damping On Bumps - Shimano EDISON COMP I-12 Original Operating Instructions

9.5.5.4 Excessively hard damping on bumps

When the bike hits a bump, the damper deflects
too slowly and the rear wheel lifts up from the
bump. Traction is reduced (blue line).
Figure 269: Excessively hard damping in the rear frame damper on bumps
Solution
1
2
Figure 270: Position and shape of the compression adjuster (blue) depends on the model
 Turn compression adjuster anti-clockwise.
 The damping and compression hardness is
reduced and the deflection stroke speed is
increased. Sensitivity to small bumps is
increased.
MY22H03 - 22_1.0_01.10.2021
Troubleshooting, fault clearance and repair
Saddle and rider are deflected upwards and
forwards, the rear wheel loses contact with the
ground and control is reduced (green line).
223