Setting The Language; Setting Units; Adjusting The Time - Shimano EDISON COMP I-12 Original Operating Instructions

6.6.2

Setting the language


The settings menu is opened.
 Press switch Y (left) or switch X (left) briefly
repeatedly until LANGUAGE is displayed on
the menu.
 Press the button (display) or switch A (left).
 There are six options:
Language
ENGL ISH
FR AN ÇAI S
DEU T SCH
NED E R LA N DS
IT ALI AN O
E S P A Ñ O L
Table 47: Language change options
 Push switch Y (left) or switch X (left) briefly
until the required language is highlighted.
 Press the button (display) or switch A (left).
 The language has been changed.
6.6.3

Setting units


The settings menu is opened.
 Press switch Y (left) or switch X (left) briefly
repeatedly until UNIT is displayed on the
menu.
 Press the button (display) or switch A (left).
 There are two selection options:
Display Function
KM Unit in km
MIL E Unit in miles
Table 48: Units change options
 Push switch Y (left) or switch X (left) briefly
until the required function is highlighted.
 Press the button (display) or switch A (left).
 The unit has been changed.
 The display screen switches back to the start
screen.
MY22H03 - 22_1.0_01.10.2021
6.6.4

Adjusting the time

Set the hours and then the minutes. The values
can be changed quickly by holding down the Y
switch (left) or X switch (left).

The settings menu is opened.
 Press switch Y (left) or switch X (left) briefly
repeatedly until CLOCK is displayed on the
menu.
 Press the button (display) or switch A (left).
 The set time is displayed. The hour indicator is
highlighted.
 Press the switch Y (left) or switch X (left)
repeatedly until the required hour is displayed.
 Press the button (display) or switch A (left).
 The minute indicator is highlighted.
 Press switch Y (left) or switch X (left) briefly
repeatedly until the required minute is
displayed.
 Press the button (display) or switch A (left).
 The display screen switches back to the start
screen.
Operation
119