Warnings And Errors; Warnings; Error Messages - Shimano EDISON COMP I-12 Original Operating Instructions

Default settings
Display
B A C K L I G H T
B R I G H T N E S S
B E E P
UN IT
L A N G U A G E
FO N T C O LO R
Table 17: Default settings
10 Gear level indicator
The indicator is only visible if the electronic gear
shifts are used. It shows the gear currently
selected and the start gear. The gear shift info is
also displayed.
Symbol Function
C U RR E NT G E A R
S TA RT G E AR
GE AR RE COM MEN DAT I ON
Table 18: Charge level of the battery
11 Indicator for motor power used
Displays the motor assistance level. The greater
the motor assistance is, the longer the displayed
bar is.
12 System message indicator
This is where maintenance instructions, warnings
and error messages are shown.
MY22H03 - 22_1.0_01.10.2021
Function
O N
3
O N
KM
E N G L I S H
W HI TE
3.4.3

Warnings and errors

The drive system monitors itself continuously and
if an error is detected, it is indicated by a system
message. The system may switch off
automatically depending on the type of error. You
will find more information and a table containing
all system messages in Section 6.3.
The drive system distinguishes between two
system messages: warnings and error messages.

3.4.3.1 Warnings

Warnings are displayed between the selected
gear and the current speed on the system
message screen. There are limitations to the
system's operation, depending on the error type.
There is a table of system messages and remedial
measures in Section 6.3.1.

3.4.3.2 Error messages

Error messages are shown on the entire display.
There are limitations to the drive systems
system's operation, depending on the error type.
There is a table of error messages and remedial
measures in Section 6.3.2.
Operation
49