Nameplate - Shimano EDISON COMP I-12 Original Operating Instructions

Table of Contents

Advertisement

3.2

Nameplate

The nameplate is situated on the frame. Use of the
hub gear is described in
Figure 1: Nameplate, example
No. Designation
1
CE marking
2
Manufacturer's contact details
3
Type number
4
Maximum continuous power
5
Maximum permitted total weight
6
Year of manufacture
7
Pedelec type
8
Safety markings
9
Disposal instructions
10
Area of use
11
Model year
12
Weight of the ready-to-ride pedelec
13
Shut-off speed
Table 11: Explanation of information on the nameplate
MY22H03 - 22_1.0_01.10.2021
Figure
2. The nameplate
Hercules GmbH
Longericher Str. 2
50739 Köln, Germany
3
21-17-1017
EPAC
nach
EN 15194
0,25 kW / 25 km/h
4
zGG 150 kg
5
EPAC 25 kg
BJ 2021 / MJ 2022
6
7
8
Description
The manufacturer uses the CE marking to declare that the pedelec
complies with applicable requirements.
You can contact the manufacturer at the address indicated.
All pedelec models have an eight-digit type number, which is used to
specify the design model year, the type of pedelec and the version.
The maximum continuous power is the greatest possible power for the
electric motor output shaft over 30 minutes.
The maximum permitted total weight is the weight of the fully assembled
pedelec with the rider plus baggage.
The year of manufacture is the year in which the pedelec was
manufactured. The production period is between June 2021 and June 2022.
Each pedelec is assigned a pedelec type, which determines its proper use,
function and area of use.
Safety markings warn of hazards.
These instructions must be followed when disposing of the pedelec.
The pedelec may only be ridden in authorised locations.
The model year refers to the first production year that the series-
manufactured pedelec was produced in the version concerned. The year of
manufacture is different to the model year in some cases.
The weight of the ready-to-ride pedelec is specified as a weight of 25 kg or
above and refers to its weight at the time of purchase. Extra accessories
need to be added to the weight.
The speed that the pedelec reaches at the moment when the current has
dropped to zero or to the no-load current value.
contains thirteen pieces of information.
Typ:
Description
2
1
13
12
11
10
9
More
information
Section 1.1
Section 1.5
Section 3.2
Section 2.6
Section 10
Section 3.6
Section 4.1
24

Advertisement

Table of Contents
loading

This manual is also suitable for:

Edison gr i-11Edison sport i-1Nos fs suv 2.1Nos fs suv 2.2Nos suv 2.1Nos suv 2.2

Table of Contents