General; Operation Manual Use - General Information - Trotec Speedy 400 flexx Operation Manual

1 GENERAL

1.1

Operation Manual Use - General Information

Caution:
Please read and follow this Operation Manual carefully, before
installation and operation. Damage to persons and/or material can
result from not following individual points of the Operation Manual!
Operation of the system is only permitted with equipment and spare parts supplied
or listed in the spare parts and consumables lists.
Auxiliary equipment must be adjusted to the base machine (any queries to dealer or
manufacturer).
The following symbols are used for easier understanding of the Operation Manual:
If the Operation Manual is not observed, this area represents a
particular danger for the operating personnel or the personnel
responsible for maintenance.
Caution: This component is under voltage. In these areas strictly
observe the safety instructions regarding electricity. Care is to be
taken in particular during maintenance and repair work
Caution: In this area pay attention to the possible dangers of the laser
beam.
Note or information on individual components of the device, that
simplify the use or make it more understandable.
8026 | V5.0_EN (11/2015)
Technical changes reserved
Trotec Laser GmbH
Page 5 of 62