In Case Of Safety Device Malfunction; In Case Of An Emergency; In Case Of Malfunction; In Case Of Accident; First Aid - Trotec Speedy 360 flexx Operation Manual

Speedy 360
2.7.8

In case of safety device malfunction

In case of actual or presumed damage to the safety devices:

Press the emergency stop button

Disconnect the machine from the mains

Contact your local Trotec Support
2.8

In case of an emergency

2.8.1

In case of malfunction


In case of unusual operating states, open the acrylic top lid to stop working process or respectively
press the emergency stop button, if available and switch off the laser device.

When appropriate disconnect the machine from the mains.

Inform laser protection officer and supervisor.

Follow the operating instructions.

Have repair work performed by Trotec service technicians only.

In case of fire: Use only CO
endangering yourself.
2.8.2

In case of accident; First Aid


If due to laser irradiation eye injury has occurred (upon exceedance of the maximum allowable
irradiation rate), the accident victim must immediately be presented to an ophthalmologist.

Assumption of eye injury is justified whenever laser irradiation has occurred and the maximum
allowable irradiation rate may have been exceeded.

First Aider must pay attention to self-protection.

Power off the device.

Remove injured person from the danger zone and provide First Aid. Call emergency physician!
BA 8032_2.2_EN (05/2016)
extinguisher to quench the fire, insofar as this is possible without
2
www.troteclaser.com
22 / 90