Safety
3.7
In case of emergency
WHAT TO DO IN THE EVENT OF MALFUNCTIONS
In unusual operating conditions, open the lid to stop the machining process press the emergency stop button and
•
switch off the machine.
If necessary, disconnect the machine from the main power supply.
•
Inform the laser protection officer and your supervisor.
•
Repair work must only be carried out by Trotec Laser GmbH service technicians.
•
In the event of a fire: Fight the fire with a CO
•
Notice
Aer a deletion, Trotec Technical Support must be involved before the system is put back into operation.
WHAT TO DO IN THE EVENT OF AN ACCIDENT, FIRST AID
If eye damage occurs due to laser radiation, the casualty must present to an ophthalmologist immediately.
•
First aiders must protect themselves.
•
Disconnect the device from the power supply and secure it against restarting
•
–
Remove the key switch.
–
Unplug the power cable.
Rescue the injured person from the danger area and provide first aid.
•
Call an emergency doctor!
•
22
fire extinguisher as far as is possible without risk.
2