Safety Norms And Regulations - Trotec Speedy 360 flexx Operation Manual

Speedy 360
2.1.3

Safety norms and regulations

The following directives and guidelines must be observed to avoid hazards when operating Trotec
laser systems:
EN 60825-1 Safety of Laser Products - Part 1: Equipment Classification and Requirements
Information Technology Equipment – Safety
EN 60950
EN 61010-1 Safety Requirements for Electrical Equipment for Measurement, Control and
Laboratory Use; General Requirements
BGV B2 (VBG93) Laser Radiation
UL 60950 Standard for Safety for Information Technology Equipment
Electrical Equipment for Laboratory Use – Part 1: General
UL 31011-1
Performance Standard for Light-Emitting Products – Specific Laser Products
21 CFR 1040.10
Performance Standard for Light-Emitting Products – Specific-Purpose Laser
21 CFR 1040.11
Products
The general guidelines and directives listed within this manual may differ according to
locality, region or country.
Therefore, always observe the directives as well as the regulations of the institutions for
statutory accident insurance association applicable to you.
The operator is responsible for fulfilling all safety requirements, as Trotec Laser GmbH
has no influence on the proper use of the machine.
BA 8032_2.2_EN (05/2016)
www.troteclaser.com
12 / 90