Table of Contents
Advertisement
3.1.5
Operating modes
NORMAL OPERATION
For normal operation the following conditions must be met:
Intended use of the machine (see chapter "Intended use").
•
Operation of the machine only by trained personnel.
•
Full functional and mounted safety devices.
•
Machine must be in technically flawless condition.
•
Processing of permissible materials according to the material list.
•
Maintenance and service are not included.
•
Notice
During normal operation it is not necessary to wear safety glasses.
SERVICE OPERATION
Service activities may be carried out only by authorized, trained service technicians. If side panels as well as covers get
removed and safety devices get bypassed, it can lead to direct and indirect scattered radiation. The service operation is
therefore declared as laser class 4 (US: class IV) and proper precautions need to be taken (see "Laser classification").
3.1.6
Applicable safety regulations
The following directives and guidelines must be observed to avoid hazards when operating Trotec laser systems:
GUIDELINES/REGULATIONS
2006/42/EC
2014/30/EU
APPLIED HARMONIZED STANDARDS
EN ISO 12100:2011-03
IEC 60825-1:2014,
EN 60825-4:2011
IEC 60204-1:2005
ISO/DIS 11553-1:2009-03
IEC 61000-6-4:2007-02
ISO 13857:2008
EC Machinery Directive
EMC Guideline
Safety of machinery - General principles for design - Risk assessment and risk
reduction.
Safety of laser products - Part 1: Equipment classification and requirements.
Safety of machinery - Electrical equipment of machines - Part 1: General
requirements.
Safety of machinery - Laser processing machines - Part 1: General safety
requirements.
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission
standard for industrial environments.
Safety of machinery - Safety distances to prevent hazard zones being reached by
upper and lower limps.
Safety
15
Advertisement
Table of Contents
