Putting into service
3.5
Loading and transporting
Attention
• When loading and transporting the machine to the work site, the
squeegee and brush head must be raised.
• When loading the machine, reverse it (empty drive) up the ramp
(maximum slope 18 %).
• Risk of skidding! Drive extremely carefully, especially on wet
ramps.
Loading
When loading the machine, observe its weight, see Section 4 Technical data.
Transporting
When transported on a vehicle or trailer, the machine must be secured
against tilting and rolling away. Tie the machine down tightly. To do this, use
tension belts to secure the machine on the supports Fig. 13-10 at the front
and on the eyes Fig. 13-A at the rear.
Fig. 13:
38
10
A
03-7175-00-00.fm