Table of Contents
Advertisement
Connection to a controller
Precondition
The camera is connected to the controller as specified in the chapter Installation/connection
(Page 35).
Connection options
Two options are available for connecting the SIMATIC MV540 H CRANES camera to a controller:
1. Connection via PROFINET IO (Page 120)
PROFINET IO is the preferred option for new systems.
2. Connection via Ethernet UDP (Page 128)
The option of an Ethernet UDP link is provided for controllers that do not support PROFINET.
SIMOCRANE CenSOR
Operating Instructions, 07/2021
9
119
Advertisement
Table of Contents
