INSTALLATION
3
3.10 Turning the connection housing
DANGER!
All work on the device electronics may only be carried out by appropriately trained personnel.
The regional occupational health and safety directives must always be observed.
Figure 3-19: Turning the connection housing
1 M4 Allen screw on connection housing
• Loosen the M4 Allen screw ① on the side of the connection housing.
• Rotate the connection housing to the desired position (0...<360°).
• Tighten the M4 Allen screw ① again.
40
www.siemens.com/flow
SITRANS FX330
08/2022 - A5E36751269-AG EN