Table of Contents
Advertisement
Basic safety instructions
2.2 General safety instructions relating to software
Electric shock due to equipment damage
Improper handling may cause damage to equipment. For damaged devices, hazardous
voltages can be present at the enclosure or at exposed components; if touched, this can result
in death or severe injury.
• Ensure compliance with the limit values specified in the technical data during transport,
• Do not use any damaged devices.
2.2
General safety instructions relating to software
Danger to life if the safety instructions and residual risks are not observed
If the safety instructions and residual risks in the associated hardware documentation are not
observed, accidents involving severe injuries or death can occur.
• Observe the safety instructions given in the hardware documentation.
• Consider the residual risks for the risk evaluation.
2.2.1
Malfunctions of the machine as a result of incorrect or changed parameter
settings
Malfunctions of the machine as a result of incorrect or changed parameter settings
As a result of incorrect or changed parameterization, machines can malfunction, which in turn
can lead to injuries or death.
• Protect the parameterization (parameter assignments) against unauthorized access.
• Handle possible malfunctions by taking suitable measures, e.g. emergency stop or
10
WARNING
storage and operation.
WARNING
WARNING
emergency off.
SIMOCRANE CenSOR
Operating Instructions, 07/2021
Advertisement
Table of Contents
