3. In the main menu, click "Network Analysis". A new window opens. Depending on the size of
the network, it may take a while before all the detected nodes are displayed. Look for the
"SIMATIC MV540H CRANES" camera.
Figure 7-3
4. Double-click the camera icon. The menu "Set Network Parameters" opens. Enter the IP
address and the subnet mask (network mask) and click "Set" to close the window.
Figure 7-4
5. The camera now has the required IP address. You can also see this in the "Device Table" under
"Graphical View". You can now close PRONETA Basic.
SIMOCRANE CenSOR
Operating Instructions, 07/2021
PRONETA - Network Analysis
PRONETA - Set Network Parameters
Commissioning
7.2 Connecting the camera
51