Table of Contents
Advertisement
Installation/connection
6.2 SIMOCRANE CenSOR for an indoor crane
Figure 6-2
Install the reflector on the load suspension device of the indoor crane
NOTICE
Install the reflector properly
Improper installation will damage the reflector.
Note
The reflector must be easily visible from above / maximum skew of the reflector
• The reflector must be clearly visible vertically from above and must not be hidden by
structural elements.
• Install the reflector such that it is skewed by a maximum of 2 degrees in relation to the camera
when in the zero position (without skew of the load suspension device).
• The maximum measurable rotation angle is ± 15°. A larger skew would prevent the camera
from recognizing the pattern of the reflector.
38
SIMATIC MV540 H CRANES with attached lighting unit and mounting plate
SIMOCRANE CenSOR
Operating Instructions, 07/2021
Advertisement
Table of Contents
