Table of Contents
Advertisement
Commissioning
7.1
Preconditions
For commissioning, you need a PC that fulfills the following precondition:
• PRONETA Basic or an alternative application must be installed
You can find PRONETA in your SIMATIC installation or as a free download on the pages of the
Siemens Industry Online Support.
Note
PRONETA
Setup using PRONETA is described in these operating instructions as an example.
7.2
Connecting the camera
Preconditions
• The camera has been connected to the power supply via the combination interface.
• PRONETA is installed.
Table 7-1
Step
Step 1: Connect the camera and PC using an Ethernet cable
Connect the camera directly to your PC/programming device using an Ethernet cable.
Note
No crossover cable necessary
You do not need a crossover cable because the camera is capable of auto-crossing and
automatically detects the type of cable you are using.
SIMOCRANE CenSOR
Operating Instructions, 07/2021
Steps to be taken for first commissioning
Activity
1
Connect the camera and PC/programming device using an Ethernet cable
2
Switch on the power supply
3
•
Select a network adapter
•
Configure the Ethernet connection between the camera and PC
4
Start Web Based Management (WBM)
7
49
Advertisement
Table of Contents
