Digi ConnectCore 8X Hardware Reference Manual page 2

Revision history—90002295
Revision Date
4P March 2020 Added North American certifications; added power consumption section;
5P May 2020
A August
2020
B December
2020
C June 2021
Trademarks and copyright
Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United States
and other countries worldwide. All other trademarks mentioned in this document are the property of
their respective owners.
© 2021 Digi International Inc. All rights reserved.
Disclaimers
Information in this document is subject to change without notice and does not represent a
commitment on the part of Digi International. Digi provides this document "as is," without warranty of
any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or
merchantability for a particular purpose. Digi may make improvements and/or changes in this manual
or in the product(s) and/or the program(s) described in this manual at any time.
Warranty
To view product warranty information, go to the following website:
www.digi.com/howtobuy/terms
Customer support
Gather support information: Before contacting Digi technical support for help, gather the following
information:
Product name and model
ConnectCore® 8X System-on-Module Hardware Reference Manual
Description
updated frequency value, variants information, and some graphics;
updated MCA to trademarked name.
Added operating temperature statement.
Added Canada, Europe, and Japan certifications; FCC notices; RF table;
and antenna port section.
Added ConnectCore 8X Dual SOM features; added power rails distribution
note; modified power interfaces; replaced electrical characteristics table;
added pin name for LGA pad B6; removed incorrect image from external
voltage reference section; added new Keypad and LED controller
chapters to MCA section; removed KS3 power consumption use case;
revised Transmit power section.
Added MTBF section; expanded Keypad and LED controller sections;
added mechanical specifications reference; designated pads C3 and C27
as reserved; updated AH13; added RTC mode power consumption use
case; fix error in Japan radio marking label; combined pinout tables;
clarified power domains; comment pad F2.
2