About the ConnectCore® 8X
Arm Cortex-M0+ Digi Microcontroller Assist
n
Cortex-M0+ core operates up to 48MHz.
l
Power and reset control.
l
Real time clock (RTC).
l
19 general purpose IOs (GPIOs), all IRQ capable with debouncing configuration.
l
9 analog to digital converters (ADCs), all with comparator capabilities.
l
Watchdog.
l
Tamper detection, both digital and analog.
l
8 bytes of non volatile storage (NVRAM).
l
3 UARTs, with optional hardware handshake.
l
10 pulse width modulators (PWMs).
l
Module variants
See the
ConnectCore 8X product page
Block diagrams
The following figures show block diagrams of the ConnectCore 8X module and of the NXP i.MX 8X
application processor.
ConnectCore® 8X System-on-Module Hardware Reference Manual
TM
(MCA) subsystem:
for information on available variants.
Module variants
9